In the last post I reshaped the handle on the large Gransfors Bruk adze, this time I replace the handle entirely on my small GB adze. There has always been something wrong with the small GB adze, I have never felt comfortable using it. I have shaved the handle down as a smaller handle is more comfortable to grip over longer periods of work. I also reshaped and made the pommel smaller, all to no avail. I feel that handle length is the real issue here, it is too short for comfortable and efficient use.
Time to make a new handle. It is possible to get the old handle out without wrecking it, a little bit of patience is required. All I used was a medium sized flat head screwdriver and a hammer. The new handle was made about 3 inches longer. As you can see the adze handle is the same handle as on the hand hatchet. Why use a an axe handle on a well made adze head? In my experience of using tools, handles are not interchangeable between axe and adze and if you do use the wrong handle the use and functionality of the tool is compromised.
This new handle makes so much difference to how the adze handles, what is more important is the strain is lessened on my body. I am not sure if this is the best shape of handle, but time will tell. It will be easy enough to take the one wooden wedge out and replace the handle. Removing the old handle and making and fitting a replacement took me less than an hours work. I am not sure whether I would recommend you doing the same, it depends on your ability and experience. By nature I am a cautious man and would say leave well alone unless confident in your skills.
I would be interested in hearing your thoughts on handle length and shape, and if you prefer the Gransfor Bruk, Hans Karlssen or S Djarv adzes. If you can not or do not want to leave a comment then email me at email@example.com